3D Printing: Advancing Change for Veterans - VA Eastern Colorado Health Care System
Attention A T users. To access the menus on this page please perform the following steps. 1. Please switch auto forms mode to off. 2. Hit enter to expand a main menu option (Health, Benefits, etc). 3. To enter and activate the submenu links, hit the down arrow. You will now be able to tab or arrow up or down through the submenu options to access/activate the submenu links.

VA Eastern Colorado Health Care System

Veterans Crisis Line Badge
My HealtheVet badge
EBenefits Badge

3D Printing: Advancing Change for Veterans

A female engineer works on a 3D printing project

Kaila Grenier, a clinical rehabilitation engineer with VA Eastern Colorado Health Care System, was able to use 3D printing to replace clips for protective helmets.

By Rob Bingham, Innovation Specialist
Monday, April 12, 2021

VA staff are always looking for better ways to care for our Veterans and evaluating the use of the latest technology and trends is a necessary part of this effort. As the largest integrated health care system in the country, VA not only cares for our nation’s heroes, but it is in a unique position to advance change and positively affect the way America delivers health care. The use of 3-dimensional (3D) printing in health care is one of the many innovations VA is now focused on.

helmet cips
3D ear savers

Kaila Grenier is a clinical rehabilitation engineer with VA Eastern Colorado Health Care System. She works with a variety of different departments within the Rocky Mountain Regional VA Medical Center to help meet various product needs, especially during the pandemic. Last year, she fabricated hundreds of “ear savers” for face masks that were distributed to national logistics via the VA 3D printing network, as well as employees and Veterans locally.

Grenier worked with the Biomedical Engineering Department to identify a failure point in the MaxAir CAPR Protective Helmets where the disposable face shield attaches; the side clips were weak and breaking over time when the new face shields were being replaced after use. She was able to 3D print replacement side clips with a slight redesign and in a stronger material, preventing the helmets from going out of commission for repair.

helmet cips
3D helmet clips

“3D printing is a great method to address unique Veteran needs through innovative rapid prototyping and custom solutions, both quickly and in a cost-effective manner,” Grenier stated.

“We see a variety of Veterans with unique needs due to a myriad of injuries and disorders, and 3D printing is an avenue to fabricate custom solutions when other off-the-shelf products aren't working.”

VA’s proactive focus on 3D printing innovation ties into its broader mission of overhauling patient care with a special eye on improving patient outcomes.

helmet cips
Grenier was able to 3D print replacement side clips with a slight redesign and in a stronger material for MaxAir CAPR Protective Helmets

VA not only stands to benefit from innovation in 3D printing and medical care, but also its volume of resources and hospital network are uniquely well positioned to contribute to research into new methodologies.

This work is part of VA Center for Innovation’s VA Innovators Network to help build a culture of innovation embedded at the front lines of VA to allow employees to see and solve opportunities on the front lines to develop the best possible experience for Veterans.


Get Updates

Subscribe to Receive
Email Updates